Problem | Restore | Restore Plus |
Silicate Gel | Excellent | Poor |
Rust | Poor | Good |
Scale | Poor | Excellent |
Oil, Grease & Fuel | Excellent | Good |
Solder Bloom | Poor | Good |
Restore Plus™
د.إ0.000
Restore Plus is an acid-based chelating cleaner designed to remove heavy rust and scale deposits. It is better at removal of oil and fuel fouling than alkaline cleaners.
- Mild Acid-Based Chelating Cleaner
- Safely Removes Rust, Corrosion, Scale, and Solder Bloom – Without Disassembling your Cooling System
Restore and Restore Plus address the variety of cleaning needs. They remove contamination without harming the metal surfaces, gaskets, hoses or plastic parts of a heavy-duty cooling system. Both cleaners work quickly and effectively to solve cooling system problems, saving cost-intensive downtime.
Restore Plus is an acid-based chelating cleaner designed to remove heavy rust and scale deposits. It is better at removal of oil and fuel fouling than alkaline cleaners.
- Removes heavy corrosion, scale deposits and oil contamination
- Cleans cooling systems without leaving a film on heat transfer surfaces
- Does not harm metal surfaces, gaskets, hoses or plastic parts
Product Type | Genset |
---|
QR Code
Related Products
- desktop-columns-3 tablet-columns-2 mobile-columns-1
-
SL Model
د.إ0.000Availability: In stockOut of stock
3 Range Model:
Fixed Thermostat:
80–100 °F (24–38°C)
100–120 °F (38–49 °C)
120–140 °F (49–60 °C)
Adjustable 90° – 130°F (32°C – 54°C)
-
CSM Style A
د.إ0.000Availability: In stockOut of stock
HOTflow™ model CSM was developed to preheat diesel and gas engines for stationary land power, marine, large mining and construction equipment.
-
CSM Style B
د.إ0.000Availability: In stockOut of stock
HOTflow™ model CSM was developed to preheat diesel and gas engines for stationary land power, marine, large mining and construction equipment.
-
CTM Model
د.إ0.000Availability: In stockOut of stock
HOTflow™ model CTM was developed to preheat diesel and gas engines for stationary land power, marine and construction equipment.
-
CL Model (Watertight)
د.إ0.000Availability: In stockOut of stock
Pressure switch or relay for automatic operation
Universal mounting for varied mounting configuration
100° to 120°F fixed thermostats
On/Off switch for manual control
Watertight components rated NEMA 12
Viton mechanical seal pumps for extended seal life and temperatures to 350°F
External motor protective switch reset button -
-
AF27993NF Air Filter
د.إ0.000Availability: In stockOut of stock
Features:
■ Nanofibre filter media provides the highest possible engine protection efficiency without compromising filter life
■ Pleat geometry, spacing and stabilization yields maximum filter performance and long life for lower equipment operating costs
■ Proven radial air filter seal ensures reliable fit in the SSG air housing and easy service events
■ Complete Fleetguard system solution including the AF27994 secondary filter and the SP1307 housing service cover -
-
CMM Model
د.إ0.000Availability: In stockOut of stock
- Heating Fluid: Engine coolant (50% glycol/50% water)
- Power: 12 – 24kW
- Rated Voltage: 400V/50Hz/3ph, 440V/60Hz/3ph, 690V/50&60Hz/3ph
- Temperature Controller: Adjustable 32°-212°F (0°-100°C)
- Temperature Setting: 120°F (50°C)
- High Limit Temperature Control: Adj. 32°-212°F (0°-100°C)
- High Limit Temperature Setting: 195°F (90°C)
- Fluid Capacity: 0.8 gal (3.0L)
- Pump Power: 0.5Hp (0.37kW)
Reviews
There are no reviews yet.